With 2.4 inch TFT color screen, which is mainly targeted to analyze the battery healthy status to calculate the actual cold cranking, capability of the battery and the aging extent, which provide reliable analysis evidence for the test and maintenance of the battery.
Easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery,healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintence personnel to find the problem quickly and accurately.
It is used for activated style lead-acid storage battery, along with checking battery life time and the following conditions of the battery, starting up, charging, and electrical loading.
The larger the CCA value of the battery , the internal resistance is generally smaller.
The standard voltage is 9.6V. The test result is more than 9.6V???the boot system is normal. (Otherwise???the boot system is abnormal.)
If the voltage reading is less than 12.8V (For 24V system , the reading is less than 25.60V). Please check whether the generator belt is worn and the wire is short-circuited or not.
If the voltage reading more than 15.0V (for 24V system , reading more than 30.00V), please check the regulator
It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.
EURO6 AdBlue Emulators Disable system: AdxBlue system (Fully) / AdxBlue NOX sensor / DPF system / DPF temperature sensors / DPF regeneration.
After installing Euro6 Emulator, you can remove: DPF sensors / NOx sensor (only in DAF dona??t remove first NOx sensor) / Adblue temp. sensor / Adblue pump / Adblue level sensor / Adblue ECU.
Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.
ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
ADBlueOBD2 does not change any of the settings permanently. To turn back to the original settings of truck, just unplug adBlueOBD2 from OBD2 connector.
It is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.
It is easy to install. Just plug it into the OBD2 connector of Truck and remove the fuses mentioned.
AdBlueOBD2 is a device which can be plugged into OBD2 connector of your truck to emulate working. Adblue system and NOx sensor on trucks, even with damaged adBlue SCR system.
AdBlueOBD2 is designed to disable adblue systems and NOx sensors on the trucks which equipped with
It will stop the usage of adBlue liquid and disable Nox sensors, without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
It is a Plug&Drive Ready device to mulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
It is easy to install. Just plug it into the OBD2 connector of Truck and remove the fuses mentioned.
Ad-BlueOBD2 is a device which can be plugged into OBD2 connector of your truck to emulate working. Ad-blue system and NOx sensor on trucks, even with damaged ad-Blue SCR system.
Ad-Blue-OBD2 is designed to disable ad-blue systems and NOx sensors on the trucks which equipped with
It will stop the usage of ad-Blue liquid and disable Nox sensors, without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
Storage battery testers are used for activated style leadacid storage battery
Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection.
Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.
This tester is the best tool for battery sales, vehicle repair and condition check of all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery.
The vehicle level as a measuring Angle and elevation Angle and the change of body rotation Angle around the product. Monitoring body Angle change at any time, using the free rotation, its sensitive degree is higher, provide data for slope and slope, make you know more about road conditions, driving safety.
The product adopts streamline design, beautiful appearance, exquisite, products are light weight, base bring back glue is convenient to install.
The workmanship and design are first-class, is the good equipment for your driving journey